Elpro Technologies 455U-D Manuale Utente Scaricare il pdf (Pagina 72)

Appendix A Response Codes

Man_455U-D Rev 3.04 Page 73

R12 Set 76,800 baud

R13 Set 93,750 baud (For Profibus)

R14 Set 115,200 baud

R15 Set 187,500 baud (For Profibus)

ATSn? Read value from S-Register n (Refer to Appendix C)

ATSn=xx Set value of S-Register n to xx (Refer to Appendix C)

ATV Verbal/Numeric Response Codes (RJ-45 port always has verbal responses)

V0 Numeric response codes on RS-232 serial port

V1

Verbose response codes on RS-232 serial port

ATX Extended Response Codes. Allows more detailed response codes, including

connection speed.

X0

Basic response codes only

X1 X0 + Connection Baud rate codes (CONNECT 19200, CONNECT 57600)

X2 X1 + BUSY Message

X3 X2 + RINGING Message

ATZ Reset the modem, and re-load the configuration stored in non-volatile memory.

AT#A Remote Configuration and Diagnostics Access Mode

#A0

Disallow Remote Access

#A1 Allow Remote Access (Password required if configured) (Use password

command AT#P to change password)

AT#B Perform BER (Bit Error Rate) test to specified address (AT#B1,2,3,4 to do BER

test to site 4 via 1, 2 and 3).

AT#C Radio Calibration Options (Can only be accessed when #R Password entered)

#C0 Calibrate Power level for Power setting 0.

#C1 Calibrate Power level for Power setting 1.

#C2 Calibrate Power level for Power setting 2.

#C3 Calibrate Power level for Power setting 3.

#C4 Calibrate Radio Frequency offset

#C5 Calibrate Radio Deviation

#C6 Calibrate Radio Modulation Balance

#C7 Calibrate Radio RSSI Using Radio TestSet

#C8 Calibrate Radio RSSI (Set default Calibration or enter actual values)

AT#E Encryption Mode (Use security menu AT#S to change encryption key)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 81 82

Nessun commento

Elpro Technologies 455U-D Manuale Utente Pagina 72